Blue Nylon LCD Display Training Collars for Dog Training PTC067

5 stars, based on (0) reviews
Price:
$29.66 $29.66 / piece
Customized Options :
  • Small
  • Medium
  • Large
Quantity: -+piece ( 30000 items available)

Item specifics

Type:
Training Clickers,Sport Training,Agility Training Products,Training Collars
Mode:
Static & Vibration
Range:
200-400M
Multi-Dog Choices:
Two Dogs
Pet Size:
Large Breed,Medium Breed,Small Breed
Material:
Plastic

How to use:

Prepare the Remote Transmitter:

Charge the Remote Transmitter:

1). Connect the charger connector to the charging jack.

2). Plug the charger into a standard outlet.

3). The red light on the Transmitter will be lighted.

4). Charge the Transmitter at least 6 hours for the first charger.

5). After fully charged, the red led will be turned off automatically.

Low battery Indicator(the symbol) :Q will show up on the right down side of LCD screen.

Use the Transmitter:

1). To turn on/off the Transmitter,Press the mode button on the Transmitter for 5 seconds.

2). By pressing the Mode button to change to different modes ----the LCD images will change.

3). Press the up and down buttons on right hand side to set level.

4). Choose the different channels for different receivers.

5). The Transmitter will go into STANDBY MODE if not operated for 20 seconds and will TURN OFF

if not operated for 2 minutes.

6). In STANDBY MODE, press any button (except LED light button) to wake it up.

Prepare the Collar Receiver:

Charge the Collar Receiver:

1). Connect the charger connector to the charging jack.

2). Plug the charger into a standard outlet.

3). The red LED light inside the Collar Receiver will turn on

4). Charge the Collar Receiver at least 6 hours for the first charge.

5). After fully charged, the red LED light will be turned off automatically.

6). When charging is completed, put the rubber cover in the right position to keep the internal unit from dust and waterLow battery Indicator:the Collar Receiver will keep beeping for 2 minuets unless It gets charged.

Connect the Transmitter with the Collar Receiver:

1). Turn on the Transmitter and choose 1or 2 channels to encode.

2). Lift the Reset part of the Rubber cover in the Collar Receiver.

3). Use a toothpick or paper click to insert into the Reset HOLE inside the Collar Receiver.

4). Press the LAUNCH button on the Transmitter immediately while you are hearing a beep from the collar.

5). The Collar Receiver will beep , it means that the Transmitter has encoded the collar.

6). After completion, put the rubber cover in the right position to keep the internal unit from dust and water.

Note:

1). The life span of the batteries vary to how often you use the product. Therefore you should often check the

batteries by hearing the beep from the Collar Receiver and watching the indicator light on the LCD screen of the

Transmitter.

2). The valid distance of remote control means the straight-line distance between the Transmitter and the Collar

Receiver without obstacles in between. If there are interference source around, the actual remote control distance

may vary.

3). This product is for pet training only by training, the pet can understand the intention of its owner. Desirable

results can only be achieved after a period of training.

4). Training sessions should be kept positive and short, about 10-15 minutes each time.

5). Presently, this product is the most effective and safest tool for pet training. Following the correct operation

instructions, you can effectively train your pet and make it a docile and adorable creature.

Please attention that all our collars are NOT waterproof.

Package Content:

1 x remote control unit

2 x collars

1 x charger & cord

2 x test light & replacement probes

1 x Operating Instructions

Best Sellers

    < >

    Related Products

      < >
      Reviews (0)
      • user name
        Review time
        Content
      • There are no reviews for this product.
      Rating: