Hot Rechargeable And Waterproof Vibration Shock Electronic Collars PTC011

5 stars, based on (0) reviews
$20.69 $20.69 / piece
Customized Options :
  • Small
  • Medium
  • Large
Quantity: -+piece ( 30000 items available)

Item specifics

Training Clickers,Sport Training,Agility Training Products,Training Collars
Static & Vibration
Multi-Dog Choices:
One Dog
Pet Size:
Large Breed,Medium Breed,Small Breed


Frequency: 433.825MHz

Transmitter: 3.7V 500ma Lip

Receiver: 3.7V 500ma Lip

Color: Black

Package weight: 10.0 oz

How to use:

1. Charge the remote transmitter/receiver:

1) Connect the charger's connector to the charging jack (DC-5V hole)

2)Connect usb cable for charging

3) The red light on the transmitter will be lighted

4) Charge the transmitter/receiver at least 6 hours for the first charge

5) After fully charged, the red LED lamp will be turned off automatically (Important note: Low battery

indicator: the symbol will show on the LCD screen)

2. Connect transmitter and receiver:

1) Turn on the transmitter by pressing any button on the transmitter

2) Press "1/2" button to choose channel for connection, choose channel 1 for the first receiver

3) Lift the rubber cover of the Reset part on the receiver. Press the Reset button inside of the receiver

with a pen or paper clip, and the green LED light will turn on

4) After a Beep came from the receiver, press the "Y" button on the transmitter within 10 seconds

5) The collar receiver will beep if successfully connected

6) Press "1/2"button to encode, choose to channel 2 for second collar by the same procedure

Important notice:

1. The transmitter will go into Standby Mode after 20 seconds if there is no operation and turn off after 20 minutes

The receiver will go into Standby Mode if unused for 4 minutes. Any movement will activate the receiver.

2. "1/2" button to choose channel for connection. In channel 1, can only train the first receiver, in

channel 2 train the second receiver

3. In working mode, if you want to reconnect the receiver, simply use a pen or paper clip, press the

reset button, there is a beep sound that indicates that it`s ready to encode

4. The receiver is designed to be waterproof. The rubber cover has to be put in the right position


1. The lifetime of the batteries depends on how often you use the product. Therefore you should often

check the batteries by hear the beep from the Collar Receiver and watching the indicating on the LCD

screen of the transmitter

2. The valid distance of remote control means the straight-line distance between the transmitter and

the Collar Receiver without obstacle. If there is interference signal or signal screening around, the

actual remote control distance may be various.

3. This product is for pet training. Only by training, the pet can understand the intention of it power.

Good effect can only be achieved after a period of training

4. Training session should be kept positive and short, about 10-15minutes long each time.

5. Presently, this product is the most effective and the safest tool for pet training. Follow the

correct operational instructions, you can effectively train the pet and bring it no harm.


1xCollar Receiver


1xUser manual

1x Test light

2xLong metal probes

2xShort metal probes

Best Sellers

    < >

    Related Products

      < >
      Reviews (0)
      • user name
        Review time
      • There are no reviews for this product.